| #001 | 2010/10/01 | Quantifying
and Verifying trace stability of vector network analyzers at frequencies
below 1GHz, Hamdi Mani, Chris Groppi, Judd Bowman |
| #002 | 2010/12/22 | MWA
Antenna Impedance Measurements, Hamdi Mani, Judd Bowman |
| #003 | 2010/12/30 | MWA REVB
LNA Measurements, Hamdi Mani, Judd Bowman |
| #004 | 2011/01/27 | MWA DUAL
LNA (REV2) Measurements, Hamdi Mani, Judd Bowman |
| #005 | 2011/05/13 | EDGES
Measurements, Hamdi Mani, Judd Bowman |
| #006 | 2011/05/25 | MWA
Antenna Measurements at the Murchison Radio Observatory, Hamdi Mani,
Judd Bowman |
| #007 | 2011/05/24 | Anritsu
MS2035B VNA Stability Evaluation, Hamdi Mani, Judd Bowman |
| #008 | 2011/07/19 | MWA
Beamformer Measurements at ASU, Hamdi Mani, Judd Bowman |
| #009 | 2012/02/04 | Charge
Controller Communication using MatLab, Jose Chavez, additional files:
Attachments.zip |
| #010 | 2012/02/08 | EDGES
Antenna Variation Report, Tom Mozdzen |
| #011 | 2012/02/09 | EDGES
Antenna Panel Thickness Variation Report, Tom Mozdzen |
| #012 | 2012/02/09 | EDGES
Antenna S11 Simulations with a Ground Cone Report, Tom
Mozdzen |
| #013 | 2012/02/10 | EDGES
Antenna S11 Simulations with Conical Panels Report, Tom
Mozdzen |
| #014 | 2012/07/26 | Implementation
of Antenna Simulator with improved-balance choke balun, Raul
Monsalve |
| #015 | 2012/07/29 | An
Automated Test System to Characterize A Large number of MWA Beamformers,
Hamdi Mani, Judd Bowman, Breana Branham, Jose Chavez |
| #016 | 2012/07/29 | DARE
MRO Expedition: Deployment and Initial Measurements, Hamdi
Mani, Judd Bowman, Sarah Easterbrook |
| #017 | 2012/07/29 | DARE MRO
Data After Receiver Swap, Hamdi Mani |
| #018 | 2012/09/06 | Remote
Solar Power and Data Acquisition System (RSPDAS) Report, Jose
Chavez |
| #019 | 2012/10/21 | Hot Load
for EDGES, Raul Monsalve |
| #020 | 2012/10/21 | Stability
of ZVL3 VNA in the Lab, Raul Monsalve |
| #021 | 2012/10/21 | Stability
of ZVA24 VNA in the Lab, Raul Monsalve |
| #022 | 2012/11/26 | Field
Notes at the MRO (EDGES/DARE)- Handwritten, Jose Chavez |
| #023 | 2012/12/17 | MRO Field
Report (2012 November), Jose Chavez, Hamdi Mani |
| #024 | 2013/01/28 | Precision
Noise Source Measurement REV1, Hamdi Mani |
| #025 | 2013/02/13 | EDGES
Spectrometer ADC card, Hamdi Mani |
| #026 | 2013/02/17 | Solid
State Noise Source Calibration Using cryogenically cooled Thermal Noise
generators, Hamdi Mani |
| #027 | 2013/02/20 | MATLAB
Code used to remotely control the ZVL3 and ZVA24 Vector Network Analyzers via LAN to Automate measurements and log data, Hamdi
Mani |
| #028 | 2013/02/20 | MATLAB
Code used to remotely control the ZVL3 Spectrum Analyzer via LAN to Automate measurements and log data, Hamdi Mani |
| #029 | 2013/02/22 | Half Angle
Sweep for Biconical Wire Skeleton Antenna, Jose Chavez |
| #030 | 2013/02/25 | MATLAB
Code and GUI used to Talk to the LABJACK U3, configure the IOs as digital Outputs, Hamdi Mani |
| #031 | 2013/02/25 | Cryogenically
Cooled 50 Ohm Terminations for Receiver Calibration, Hamdi Mani |
| #032 | 2013/02/25 | MATLAB
Code and GUI used to control the MWA beamformer, Hamdi Mani |
| #033 | 2013/02/28 | Initial
Measurement of the DARE engineering prototypeFront End unit (BALUN):
Sparameters and Noise Temperature, Hamdi Mani |
| #034 | 2013/03/02 | RFI in
ISTB4 Lobby (prep for Night of Open Door), Jose Chavez, Hamdi
Mani |
| #035 | 2013/03/07 | DARE Balun
with an external Noise Calibration source, Hamdi Mani |
| #036 | 2013/03/07 | Short
report on Design, Assembly and testing of a cheap and easy to build
solid state noise source, Hamdi Mani |
| #037 | 2013/03/17 | Comb
Generator Stability Measurements, Jose Chavez |
| #038 | 2013/03/17 | PAPER
balun schematic, Raul Monsalve (R. Bradley) |
| #039 | 2013/03/27 | Antenna
Variable Parameter Sweep, Jose Chavez |
| #040 | 2013/03/28 | Radio
Spectrum Allocation in Chile, Raul Monsalve |
| #041 | 2013/04/07 | bicoLOG
5070 Antenna Simulation, Jose Chavez |
| #042 | 2013/04/07 | bicoLOG
5070 Antenna Calibration, Jose Chavez |
| #043 | 2013/04/16 | Updated
Antenna Results, Jose Chavez |
| #044 | 2014/06/26 | Investigating MWA delay power spectra, Michael Busch |
| #001 | 2013/05/02 | Propagation of Instrumental Errors to the Sky Temperature Measurement, Raul Monsalve |
| #002 | 2013/05/14 | First Measurement of Antenna using Mechanical Switch, Raul Monsalve |
| #003 | 2013/05/22 | Measurement of Antenna using Air-dielectric Adapters and No Teflon in Tuner, Raul Monsalve |
| #004 | 2013/06/20 | Quick Look at Changes in Antenna Reflection Coefficient When Applying Heat with Heat Guns, Raul Monsalve |
| #005 | 2013/07/11 | Measurement of Antenna (Aluminum Base), Raul Monsalve |
| #006 | 2013/07/13 | Revisiting the Calibration Method, Raul Monsalve |
| #007 | 2013/07/18 | VNA Accuracy Test, Raul Monsalve |
| #008 | 2013/07/21 | VNA Accuracy Test 2, Raul Monsalve |
| #009 | 2013/07/26 | Heating and Cooling Test, Raul Monsalve |
| #010 | 2013/08/01 | Sensitivity of Antenna to Different Perturbations, Raul Monsalve |
| #011 | 2013/08/01 | VNA Accuracy Test 3, Raul Monsalve |
| #012 | 2013/08/07 | Effect of Loss on VNA Calibration Standards, Raul Monsalve |
| #013 | 2013/08/11 | New Antenna Measurements With and Without the Shield, Raul Monsalve |
| #014 | 2013/08/12 | Cross-check of Short and Open Standards, Raul Monsalve |
| #015 | 2013/08/15 | Antenna Measurements in a Softball Field, Raul Monsalve |
| #016 | 2013/08/22 | Ground Plane Test in the Softball Field, Raul Monsalve |
| #017 | 2013/08/29 | Effect of Error in Open and Short Standards on Measurement of Attenuator, Raul Monsalve |
| #018 | 2013/09/28 | Using a Labjack U3 with Python on Linux, Raul Monsalve |
| #019 | 2013/10/02 | Temperature Coefficients for DC Resistance of Match and Reference Attenuators, Raul Monsalve |
| #020 | 2013/10/03 | Cross-Check Between Short Standards, Raul Monsalve |
| #021 | 2013/10/23 | Correction of Reflection Coefficient of 10-dB Attenuator Measured with a FieldFox VNA, Raul Monsalve |
| #022 | 2013/10/23 | Correction of Reflection Coefficient of 6-dB Attenuator Measured with a FieldFox VNA, Raul Monsalve |
| #023 | 2013/11/13 | Status of the EDGES Antenna at the Site After Deployment of November 2013, Raul Monsalve |
| #024 | 2013/11/14 | Quick Look at Antenna S11 Data Taken at Boolardy, Raul Monsalve |
| #025 | 2013/11/21 | Linear Antenna Dependence on Temperature, Raul Monsalve |
| #026 | 2013/11/27 | Performance of Antenna Measurement Setup, Raul Monsalve |
| #027 | 2014/01/13 | EDGES-2 Base Plate Drawing, Raul Monsalve |
| #028 | 2013/07/15 | Top Plate Heating Experiment, Tom Mozdzen |
| #029 | 2013/08/28 | Impact of Polystyrene Box on Antenna, Tom Mozdzen |
| #030 | 2013/09/06 | Effect of LNA Box on Antenna, Tom Mozdzen |
| #031 | 2013/09/12 | Effect of LNA Box on Antenna - UPDATE, Tom Mozdzen |
| #032 | 2013/09/16 | Performance of Different Top Plate Designs, Tom Mozdzen |
| #033 | 2013/11/20 | Simulation of Antenna Panels with FEKO and CST, Tom Mozdzen |
| #034 | 2013/12/08 | Study of FEKO Meshing for Antenna Panels, Tom Mozdzen |
| #035 | 2014/05/02 | Toward an Accurate Calibration of EDGES Using Temperature References, Raul Monsalve |
| #036 | 2014/05/12 | Toward an Accurate Calibration of EDGES Using Temperature References: II, Raul Monsalve |
| #037 | 2014/05/30 | First Look at Good-Quality EDGES Data, Raul Monsalve |
| #038 | 2014/06/11 | Correction of EDGES Data using CST Beam, Raul Monsalve |
| #039 | 2014/06/23 | Comparison Between Global Sky Model and Haslam Map when Convolved with FEKO Beam, Raul Monsalve |
| #040 | 2014/06/30 | Choosing a Test Network for the Forward-Reverse Method of VNA Standard Characterization, Raul Monsalve |
| #041 | 2014/07/07 | Studying the Forward-Reverse Method Through Simulations, Raul Monsalve |
| #042 | 2014/07/13 | Studying the Forward-Reverse Method Through Simulations: II, Raul Monsalve |
| #043 | 2014/08/18 | Characterization of SPDT RF Switch, Raul Monsalve |
| #044 | 2014/10/30 | Developments at ASU for the EDGES Deployment of October 2014, Raul Monsalve |
| #045 | 2014/11/05 | S11 Measurements Before and During the
EDGES Deployment of October 2014, Raul Monsalve |
| #046 | 2014/08/18 | CST Simulation Results Using the New Top Cap Design, Tom Mozdzen |
| #047 | 2014/09/05 | Finite Ground Screen Effects Upon Below Horizon Response, Tom Mozdzen |
| #048 | 2014/09/09 | Finite Ground Screen Effects Upon Below Horizon Response - Supplemental Update, Tom Mozdzen |
| #049 | 2013/08/22 | Farfield Vertical Gain Component at the Horizon with and without a Shield, Tom Mozdzen |
| #050 | 2014/02/27 | Ground Pickup From a Seven Degree Horizon, Tom Mozdzen |
| #051 | 2014/11/08 | Balun Side View Vertical Stackup, Tom Mozdzen |
| #052 | 2014/11/10 | Antenna S11 Measured Between Nov 07 and 10, 2014, Raul Monsalve |
| #053 | 2014/11/11 | Finite Length Horizontal Dipole over a Ground Plane: Simulated Beam vs Analytical Beam Study, Tom Mozdzen |
| #054 | 2014/11/11 | Guidelines to Set CST Solver Accuracy, Tom Mozdzen |
| #055 | 2014/12/08 | Testing the Temperature Controller on 2014/12/08, Raul Monsalve |
| #056 | 2014/12/08 | EDGES - Temperature Control Circuit, Raul Monsalve |
| #057 | 2014/12/11 | Testing the Temperature Controller on 2014/12/11, Raul Monsalve |
| #058 | 2015/02/12 | Progress Toward a Full Uncertainty Propagation Machinery for EDGES, Raul Monsalve |
| #059 | 2015/02/19 | Progress Toward a Full Uncertainty Propagation Machinery for EDGES: II, Raul Monsalve |
| #060 | 2015/03/05 | Summary of Antenna S11 Measurements at MRO Starting on 2015/02/27, Raul Monsalve |
| #061 | 2015/03/11 | Highband Blade Antenna CST Simulation Matrix 3x3x3x2 S11 Results, Tom Mozdzen |
| #062 | 2015/03/18 | Highband Blade Antenna Update:Beam Patterns, Derivatives, and RMS Error Calculations Included, Tom Mozdzen |
| #063 | 2015/05/13 | Antenna S11 Measurements at MRO, April/May 2015, Raul Monsalve |
| #064 | 2015/06/04 | Comparison of Alternatives for Calibration of the High-Band Receiver 2015 at 25oC, Raul Monsalve |
| #065 | 2015/06/11 | Reflection Coefficient Measurements of the EDGES High-Band Fourpoint Antenna Starting on 2015/06/06, Raul Monsalve |
| #066 | 2015/08/04 | Reflection Coefficient Measurements of the EDGES High-Band BLADE Antenna Starting on 2015/07/31, Raul Monsalve |
| #067 | 2015/09/22 | Reflection Coefficient Measurements of the EDGES High-Band BLADE Antenna Starting on 2015/09/19, Raul Monsalve |
| #068 | 2015/09/25 | Stability of the Antenna Reflection Coefficient Measurements at the MRO, Raul Monsalve |
| #069 | 2015/09/26 | Pictures of the Low-band Receiver Assembly, Raul Monsalve |
| #070 | 2015/12/10 | Reflection Coefficient Measurements of the EDGES Low-Band BLADE Antenna Starting on 2015/12/08, Raul Monsalve |
| #071 | 2016/03/16 | Estimates for the Sky Polarization Intensity at ~150 MHz averaged over Wide Solid Angles, Raul Monsalve |
| #072 | 2016/03/16 | Spectral Index Estimation Using Fourpoint Antenna Data, Tom Mozdzen |
| #073 | 2016/03/16 | Spectral Index Estimation Using Blade Highband and Lowband Antenna Data, Tom Mozdzen |